Inicio Productos

Análisis de Aceite Lubricante y Grasa Lubricante

Todos los productos

Equipos de prueba para productos derivados del petróleo (132)

Equipo de ensayo de inflamabilidad (113)

Pruebas de Cera y Betún (42)

Análisis de Aceite Lubricante y Grasa Lubricante (51)

Pruebas de petróleo crudo, combustible y diésel (36)

Pruebas de Aceite Aislante o para Transformadores (16)

Prueba de refrigerante y anticongelante (13)

Medición de Líquido de Frenos (8)

Instrumento de ignición (25)

Prueba de resistencia al fuego (17)

equipo de prueba del cable (39)

Aparato de propagación de la llama (16)

Análisis de Producción de Humo (13)

Prueba de Liberación de Calor (9)

Instrumento de prueba eléctrica (59)

instrumentos del laboratorio (28)

De buena calidad Equipo de ensayo de inflamabilidad para las ventas

Es un equipo de calidad proporcionado por una empresa con un excelente servicio al cliente.

—— Don Heyn

Hemos incluido completamente la cámara de inflamabilidad en nuestro trabajo diario. La cámara funciona bien y estamos muy contentos con ella.

—— Sven Fleddermann

Estoy en línea para chatear ahora

ISO 2977 Aniline Point Test Equipment for Lubricating Oil and Hydrocarbon Solvents

ISO 2977 Aniline Point Test Equipment for Lubricating Oil and Hydrocarbon Solvents

JFTOT Aviation Turbine Fuel Analysis Thermal Oxidation Stability Tester ASTM D3241

ASTM D217 Grease Mechanical Worker for Grease Analysis with Cone Penetromter

ASTM D4170 Fretting Wear Measuring Instrument for Lubricating Greases

ASTM D6184 Oil Separation Sieve for Lubricating Grease by Conical Sieve Method

Análisis de Aceite Lubricante y Grasa Lubricante

(51)

ASTM D5293 Apparent Viscosity of Engine Oils Tester Using Cold Cranking Simulator
Contacto

Apparent Viscosity of Engine Oils Tester Introduction: Cold Cranking Simulator is used to measure the apparent viscosity of engine oil at low temperature (- 35 ºC ~ - 5 ºC). Method summary: Drive a rotor ... Leer más

2023-01-09 16:04:34

ASTM D2783 Extreme-Pressure Properties Test of Lubricating Fluids (4 Ball Method)
Contacto

Introduction This Extreme-Pressure Properties Test Machine uses four Ф12.7mm standard steel balls evaluate the load-bearing capacity and anti-wear performanceof lubricants (including oil film strength PB, ... Leer más

2023-01-05 12:29:45

ASTM D1263 Leakage Tendencies Tester for Automotive Wheel Bearing Greases
Contacto

ASTM D1263 Leakage Tendencies Tester Introduction Load the sample into the modified front wheel hub and shaft assembly, and let the hub and shaft run for a total of 360±5 min under the specified conditions. ... Leer más

2022-12-16 15:13:05

ASTM D1264 Water Washout Characteristics Analyzer for Lubricating Grease
Contacto

Introduction: This test method covers the evaluation of the resistance of a lubricating grease to washout by water from a bearing, when tested at 38°C and 79°C (100°F and 175°F) under the prescribed laboratory ... Leer más

2022-09-30 16:44:21

ASTM D1264 Lubricating Grease Water Washout Characteristics Tester
Contacto

Lubricating Grease Water Washout Characteristics Tester Introduction: This test method covers the evaluation of the resistance of a lubricating grease to washout by water from a bearing, when tested at 38 °C ... Leer más

2022-09-30 16:35:58

ASTM D1264 Lubricating Greases Water Washout Characteristics Test Apparatus
Contacto

Introduction: This test method covers the evaluation of the resistance of a lubricating grease to washout by water from a bearing, when tested at 38 °C and 79 °C (100 °F and 175 °F) under the prescribed ... Leer más

2022-09-30 16:34:06

Leakage Tendencies Test Instrument for Automotive Wheel Bearing Grease by ASTM D4290
Contacto

I. Introduction: This Leakage Tendencies Test Instrument is applicable to determine Leakage Tendencies of Automotive Wheel Bearing Grease Under Accelerated Conditions. The test grease is distributed in a ... Leer más

2022-09-01 10:07:12

ASTM D4289 Elastomer Compatibility Instrument for Lubricating Greases and Fluids
Contacto

Introduction: This Elastomer Compatibility Instrument is suitable for measuring the compatibility between lubricating grease and standard synthetic rubber. The standard synthetic rubber test piece with the ... Leer más

2022-07-05 12:03:24

ASTM D 2893 Oxidation Characteristics Test Set for Extreme-Pressure Lubrication Oils
Contacto

Introduction: This Oxidation Characteristics Test Set is manufactured according to SH/T 0123-93 standard and is applicable to the determination of extreme pressure lubricating oil (such as gear oil). The use ... Leer más

2022-07-04 14:30:27

DIN 51568 Lubricating Oils Flow Ability Test Apparatus by U-tube Method
Contacto

Summary This Flow Ability Test Apparatus is applicable to determine ability to flow of lubricating oil. The operating principle is to measure the rising speed of lubricating oil in the U-shaped pipe under ... Leer más

2022-07-01 09:42:10

Page 2 of 6|< << 1 2 3 4 5 6 >> >|